Installing solar panels on a livestock building can improve your income. As a supplier of livestock buildings, we would like to shed specific light on the opportunity these buildings offer for solar electricity production. We try to answer some of the questions you may have on the subject so that you can get started with greater peace of mind.
Farming and the energy produced by photovoltaic panels
In 2022, total solar energy production in France reached the equivalent of the output of one nuclear power plant. That is already very significant, but there is still a great deal of potential to realise. Increasing solar energy production is meant, on the one hand, to reduce carbon impact and limit global warming and, on the other, to increase energy autonomy by being less dependent on hard-to-control geopolitical issues, by producing energy close to its users.
In 2022, the farming sector provided 13% of energy production in France. More than 10,000 farms are equipped.
The potential roof area is large. It will meet the challenge of local, low-carbon energy production and also increase a farm’s profitability, thereby strengthening its business model.
Setting up solar energy production requires prior thought about your current farm and how it will develop in the medium to long term.
Ways to make the most of it
There are currently three main ways to make use of the energy produced by solar panels on your buildings or poultry houses.
1) Roof rental
This is the option most commonly offered commercially by solar panel installers.
The solution is to deliver you a turnkey building with the solar panels fixed to the roof and connected to the EDF grid. The foundations, slabs and cladding of the building’s walls are at your expense. A 30-year long lease (bail emphytéotique) will be imposed on you. This 30-year term is linked to a tax reason: after 30 years, the value of the building in the eyes of the tax authorities is nil, and so no capital gains tax is due. Below 30 years, the value of the building handed back will not have been written down enough, and this will give rise to capital gains tax.
The advantage of this solution is the small cash outlay required. The drawbacks are the need to read carefully the clauses of the contract binding you to the company that uses your roof for 30 years; the administrative fees that will be charged to you (which is why these companies are not interested in projects under 600 m², given the many fixed costs they have to absorb); what becomes of the company signing the lease with you, which guarantees the maintenance of the roof if it goes bankrupt; and what happens if the company does not obtain the permit or does not complete the construction of the building (construction is often subcontracted).
In short, this solution looks tempting on paper but requires a number of checks and guarantees. Moreover, you will not find any offers for buildings or poultry houses under 600 m².
2) Self-consumption and sale of the surplus
The prerequisite for choosing this option is a good knowledge of your consumption over a day and over the year. The more closely your consumption curve can match the output of your panels, the more worthwhile this option is. Battery storage being hardly viable today because of its cost, the aim is to cut your electricity consumption instantly by producing the power yourself. It can be worthwhile when the farm has cold stores, building ventilation or drying equipment.
Your surplus production will be sold to EDF, which will buy it at a fixed rate for 20 years.
You also receive a self-consumption investment premium that depends on the power of your installation, but your surplus sale price is around 30% lower than the full-sale rate. The sale is taxable but benefits from a 71% allowance.
3) Full sale
You can decide to sell all the electricity produced by your solar panels. This option seems to be the best if your energy needs on the farm are low.
Electricity produced under an agrivoltaics project is purchased by EDF through its subsidiary EDF Obligation d’Achat. The rate is regulated, guaranteed for 20 years and set every 3 months.
If the power exceeds 100 kWp, a call for tenders is launched to set the price per kilowatt-hour.
Profitability calculation for full sale
The purchase rate always depends on the power of your installation. The smaller the installation, the higher the buy-back price.
For a project, the initial rate is fixed for the whole term of your commitment with your contractor. It is the date of the grid connection request (TO) up to the acceptance of the complete file that fixes the buy-back rate. The guaranteed 20-year buy-back contract starts when the installation is commissioned. A maximum of 24 months must be respected for completing the works.
The table below shows the rates in force in the 3rd quarter of 2022, from 1 August to 31 October 2022; you should check regularly for updates to these rates.

For partial sale, the resale rates are less attractive.
We ran a profitability simulation based on a covered area of 100 m², which corresponds to a medium-sized poultry house.
Sunshine duration was set at 1,600 hours, which is well below the average sunshine duration in France.
TURPE is the mandatory grid connection charge.
Area: 100 m²
Installed power: 20 kWp
Sunshine hours: 1,600 h
Annual production: 24,000 kWh
Production taken into account: 1,200 kWh/kWp
Purchase price (Q3 2022): 12.31 c€/kWh
Sales revenue: €2,950
Maintenance cost/year (1): €400
TURPE and IFER/year: €520
Insurance/year: €200
Net revenue: €2,030
Panel investment: €15,000
Grid connection (2): €6,000
Total invested: €21,000
Payback period: 10 years
(1) including amortisation of the inverter replacement (to be planned every 10 years)
(2) taking into account the 60% reduction rate
On this basis, the payback period is 10 years. In other words, after 10 years your investment is paid back and you benefit from the income from selling the electricity produced.
Installing panels on another roof improves the overall profitability of your poultry house by around 40%.
It therefore pays for a large part of the poultry house investment.
Some key points to analyse
All farm buildings can be adapted for the installation of solar panels. However, a solar installation on this type of building must be assessed against certain key points.
Proximity to the electricity grid
Allow around €110 per metre to run the line. So, in order not to hurt the payback period, you need to check the distances to the potential grid connection point.
In addition, the connection requires a minimum capacity of 160 kVA whatever the size of your installation.
The good news is that the connection cost is reduced thanks to reduction rates (connection aid). Since 22 March 2022, this reduction rate has risen from 40% to 60% for small installations under 500 kW. Fixed poultry houses assembled from kits do not exceed 400 m² and therefore fully meet this power criterion.
The condition of the building’s roof structure
The roof structure of your building or poultry house must be assessed or calculated to make sure it can carry photovoltaic panels. A panel generally weighs around 15 kg/m², to which you must add the steel sheeting it is fixed to. In the end, the structure must be able to support 25 kg/m².
We supply the structural calculation notes for our poultry houses, which allow installers to check this and meet the mounting requirements. On an existing poultry house, reinforcement is possible.
The orientation of the building
When installing a small poultry house (under 200 m²), it is crucial to identify the direction of the prevailing winds to ensure good natural ventilation through the poultry house pop-holes.
Fitting solar panels on the roof will influence this orientation, in order to maximise the panels’ exposure to the sun. A roof inclined at 35° and facing due south gives the best yield. This is not always possible or compatible with access constraints and with orientation relative to the wind. Remember that the lower the pitch, the less the orientation affects production.
South-west and south-east orientations give perfectly acceptable yields, and so can deliver strong profitability by installing panels on both roof slopes!
A last point is to make sure that shade from nearby trees or other buildings does not affect exposure.
The following table shows the effects of tilt and orientation on production:

Our standard poultry houses have a 30° pitch for the standard huts and 14 to 21° for the modular poultry houses (above 90 m²).
Our design office also designs Cabi Sun, made-to-measure single-pitch kit buildings to maximise orientation.
Since some elements of a project are fixed costs (grid connection, transformer, inverter maintenance), it is worth thinking about maximising the number of panels, even if the exposure is not optimal, in order to improve the project’s profitability.
Ventilation of the building
Even though the efficiency of solar panels keeps improving, it is still only about 31%; the energy not converted into electricity is released as heat. Poultry house ventilation is an important criterion even without panels on the roof, but fitting panels makes it all the more essential.
In addition, the panels must be fitted so as to ensure good ventilation around them. It may seem paradoxical, but panel efficiency drops with heat, so it is best to make sure heat is dissipated effectively.
Roof watertightness
Fitting panels must in no way compromise the integrity, and therefore the watertightness, of the poultry house roof.
Today there are roof sheets specially designed for fitting solar panels. They allow the panels to be fitted by clipping, so there is no risk of losing watertightness over time. Always keep in mind that you will not touch your panels for the next 20 years, and that a watertightness problem could be very costly to fix because it would require dismantling panels. It is therefore crucial to ensure a durable mounting system on the roof.
Some misconceptions to clear up
A photovoltaic installation is compatible with keeping animals
The magnetic field emitted by solar panels is compatible with keeping animals. At a distance of 1 metre from the panels, the magnetic field is below the permanent exposure limit set by regulations, since the panels generate low-voltage direct current.
The inverters that convert the current from the panels must be installed in a small dedicated room, separate from and outside the building.
The earthing must be of good quality to rule out the risk of stray currents.
Recycling end-of-life solar panels is free
As with all waste electrical and electronic equipment, panel producers pay a tax to fund their collection and recycling. This collection is entirely free for the owner of the panels. Soren is the eco-organisation approved by the public authorities for collecting and processing end-of-life solar panels in France. It offers two collection systems: for fewer than 40 panels, they can be brought to a voluntary drop-off point. Above 40 panels, a collection request must be made on the website https://www.soren.eco/ (in French).
Dismantling the installation and packing it for transport remain the responsibility of the panel owner, but this takes little time, especially on small buildings and poultry houses.
Ageing of solar panel performance
Two recent studies in France and Switzerland have shown that the loss of solar panel efficiency is much smaller than expected, around 7 to 8% after 20 years of use.
In other words, after 20 years performance will be reduced by less than 10%, and it is even thought that panels can last 40 years.
Fragility of inverters
The inverter is an essential component of solar electricity production. It generally needs to be replaced every 8 to 12 years.
To extend its life, install it in the shade, in an insulated, ventilated room protected from dust. There are also insurance contracts covering its replacement, which avoid unexpected costs by spreading the charge annually.
Its price is around €2,000 for a 20 kWp installation, as in our study.
Taxes on a building fitted with solar panels are low
VAT-registered professionals still benefit from the VAT credit on supplies and labour.
In addition, a poultry house producing solar electricity remains exempt from property tax on built property. The farmer who uses the farm building for farming is also the electricity producer operating the solar panels. As a result, the farm building must be classified as an industrial building. All that remains is to pay the share of its value. In parallel, the installations are subject to the IFER tax, which is halved for the first 20 years and in 2022 is therefore €3.254/kW of installed power per year. That remains very reasonable. For a power of 20 kW, i.e. for 100 m², this represents €70 a year. The amount of this tax is reviewed annually.
TURPE (the public electricity network usage tariff) is intended to cover all the costs of operating, developing and maintaining the networks. The annual TURPE for an installation feeding in all of its output is: €34.32 excl. VAT/year for a power of 36 kVA or less; €457.07 excl. VAT/year for a power between 36 and 250 kVA; €752.98 excl. VAT/year for a power above 250 kVA.
